How to Know Your iPhone IMEI and Carrier

I wanted to unlock a friend’ iPhone, which need to know its network carrier. She told me the carrier was AT&T, but it turns out not. So, I came up a question that how people know their iPhone carrier. To unlock or activate your iPhone, you need to know your iPhone’s IMEI, then you can use the IMEI to know the carrier. Here I show you what will I do if I want to know my iPhone IMEI and carrier.

So the first question is to find out the IMEI. Actually, you can find it in many ways.
1. The first and easiest way is to check the setting in the cellphone. Follow the steps: Springboard->Setting-> General->About, then you can find the information.

2. Open the phone on Springboard, then input *#06#. You will see the numbers on your screen.

3. Turn around your iPhone, you can find the words engraved on the housing, including the IMEI.

4. If your connect your iPhone to iTunes, and once your computer and iTunes detect your iPhone, then you can see all the basic details about your phone after clicking iPhone button on iTunes.

5. If you do things carefully, you can find the IMEI on the iPhone box at first.

The second question is to know the carrier. What I found is to fill the IMEI in iphoneimei to check out. But if your iPhone IMEI is not available, you can use ESN in Swappa.

This article is collected in internet . Anyone who wants to fix his or her Broken Screen can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3, which won’t be expire until Dec 31,2014. It only can be used once for one account.

LG G3 Reassembly

This article is collected in internet . Anyone who wants to fix his or her Broken Screen can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3, which won’t be expire until Dec 31,2014. It only can be used once for one account.

Tools Needed:

ž   Tweezers

ž   Philip screwdriver

1.Put the rear camera into the slot.

2.Insert the front camera into the slot, then press it down.

3.Put the earphone piece into the right place.

4.Insert the earphone jack into the slot.

5.Assemble the motherboard with the front housing. Handle carefully for the sensitive PCB board. Notice the flex cables in the bottom, or they may hinder this process.

6.Connect the LCD Assembly connectors on the motherboard.

7.Cover the upper half of the rear housing on the main board.

8.Cover the bottom half of the rear housing on the loud speaker assembly and press it down carefully.

9. Fasten the rear housing with 13 screws.

10.Put in the battery and cover the battery door. Finally, the LG G3 reassembly finished.

Top 6 iPhone 6 Issues and How to Fix Them

This article is collected in internet . Anyone who wants to fix his or her Broken Screen can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3, which won’t be expire until Dec 31,2014. It only can be used once for one account.

Because Apple has made many changes to the brand new iOS 8 and its new generation iPhone devices, leaving some bugs and issues seems unavoidable. Here we’ve collected the top 6 issues and solutions of iPhone 6 and iOS 8 which most people complained about.

No. 1 Bend

It’s widely known that iPhone 6 suffers from “Bendgate” since it’s released. Even though Apple claimed that “With normal use a bend in iPhone is extremely rare”, a great deal of up-to-date news about iPhone 6 bend still coming forth.
How to fix:
Protect your iPhone 6 with a metal frame, which can protect your phone from being bent greatly.
If your phone has already suffered from bend, you’ll have to replace it with a new iPhone 6 back housing replacement. You may follow our tutorial guide How to Disassemble iPhone 6 if you have any similar DIY repair experience. If not, please turn to local repair shop or Apple store for help.

No. 2 Battery Life

Though the battery capacity of iPhone 6 has been upgraded to 1810mAh and the new A8 chip has been improved a lot in power-saving during it works, the battery life of iPhone 6 is still the top concern among users and potential users. Up until now, it seems many people have already experienced and complained about the battery drain of their iPhone 6. But don’t worry, nearly all battery problems are easy to fix, here we will walk you through some tips of how to fix the iPhone 6 battery drain issues.
How to fix:
It may be caused by a specific app, go to setting Go to Settings > General > Usage > Battery Usage to check which app is draining a speciously high amount of battery, then see if it can be upgraded or not, if not, think about uninstalling it.
Background refreshing can also be the problem, you can simply go to Settings > General > Background App Refresh to disable those you don’t need from refreshing to extend your battery life.

No. 3 Wi-Fi

Seems that many people have experienced Wi-Fi problems since their devices have been upgraded to iOS 8. The Wi-Fi signal appears to be strong, but when you browse the web or load a YouTube video and in some of the extreme cases, the connection seems to drop off totally while others’ devices enjoy the usual speed.
How to fix:
We’ve listed 10 possible solutions to this problem in another article: How to Solve Wi-Fi Problems After Updating iOS 8

No. 4 Random Reboot

Some users have complained that they experienced random reboot in their beloved iPhone 6. This is an issue which also happened in the iPhone 5 and iPhone 5S, and may occur frequently while users are doing all sort of different things.
How to fix:
Go to Settings> General > Reset and tap Reset All Settings. This won’t make any changes to your apps and files, but you have to enter your passwords and choose wallpaper again.

No. 5 Dye from Jeans

One reader of BGR.com has reported that after sliding his iPhone 6 without a protective case in and out of this jeans pockets for a period of time, the plastic strips on back of the phone was dyed from denim. Hope this is just one extreme case.
How to fix:
Use an iPhone 6 case to protect your phone from touching your jeans or just replace you iPhone 6 back housing.

No 6. Broken glass

Did you guys ever remember that the first who bought the brand new iPhone 6 in Perth, Sydney Australia? Even without the first touch, he dropped it on the group unfortunately. Since more and more people have same experience like this, you should know how to deal with this problem.
How to fix it:
If you ever have similar DIY repair experience, you could follow our How to repair the iPhone 6 broken screen guide to replace your broken iPhone 6 LCD screen and digitizer assembly, it’s not that complicated.
If you do not have any related experience, you’d better check your local repair shop or Apple store for help.

How to Fix iPhone 5/5s/5c Proximity Sensor Issue

Recently we’ve gotten some calls and emails from customers who are encountering proximity sensor issues on the iPhone 5, iPhone 5s and iPhone 5c. This is similar to past reported issues with the iPhone 4 proximity sensor not working correctly after a screen repair — particularly if another color screen was installed on the device.

This article is collected in internet . Anyone who wants to fix his or her Broken Screen can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3, which won’t be expire until Dec 31,2014. It only can be used once for one account.

The Latest Gorilla Glass Will Come Out Soon

As we all know, millions of electronic devices are using Gorilla Glass as their screen panels for its outstanding performance. Compared with other glass material, Gorilla Glass is much tougher, and lighter. That’s why Jobs choose Gorilla Glass to be iPhone’s screen.  Gorilla Glass contributes a lot to iPhone’s great success. Now, the latest Gorilla Glass will come out soon.

Corning said the Gorilla Glass 4 is designed to be tougher for rougher falls, such as dropping on the sidewalk. Form the test video we can see, the cellphone is dropped from 1 meter above the ground and the touch point is as hard as ordinary street surface. The Gorilla Glass remains intact 80% of the time, while the ordinary soda-lime glass breaks all the time. That is, once the Gorilla Glass 4 is used in your phone, your phone will be less possible to be shattered.

It’s reported that the Gorilla Glass 4 has entered the last test step. It can be imagined that many cellphone, and tablet builders are gonging to use this to produce their latest devices.

This article is collected in internet . Anyone who wants to fix his or her Broken Screen can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

How to Fix Broken Galaxy S5 Screen and Other Parts after Teardown

This article is collected in internet to show how to  fix Galaxy S5 Screen. Anyone wants to fix his or her Broken Galaxy S5 Screen  can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

Although many reports claimed that it’s harder to repair Galaxy S5 than S4, it gets 5 out of 10 (10 is the easiest to repair). Therefore, compared with other smartphones, Galaxy S5 is not hard to repair. Here we walk you through detailed steps for replacing a cracked Galaxy S5 screen, damaged GS5 camera, broken S5 loudspeaker, middle frame etc. ETrade Supply is always your prior choice to get Samsung Galaxy S5 replacement parts and components.

Please note the DIY repair will void the warranty of your Galaxy S5 but may save money. Watch the following step-by-step GS5 teardown tutorial to find how to repair your Galaxy S5 screen and other parts and components showed in below.

• Replace a cracked or shattered Galaxy S5 screen

• Fix a damaged Galaxy S5 battery

• Replace broken Samsung Galaxy S5 camera

• Fix malfunctioned Galaxy S5 ear speaker or loudspeaker

• Repair a broken GS5 battery door or problematic rear housing

• Fix a damaged Galaxy S5 earphone jack

• Repair a problematic Galaxy S5 charging port

Tools needed to disassemble Samsung Galaxy S5

Hair Dryer

Small Phillips Screw driver

Plastic Spudger

Suction Cup Tool

Several Case Opening Toll

Tweezers

Step 1: Power off the Samsung Galaxy S5.

Step 2: Remove the GS5 battery door with your thumb.

Note: If your GS5 back cover is broken, you can replace it with a new back panel at this step.

Step 3: Peel the Galaxy S5 battery off.

Note: If you suffer a damaged Galaxy S5 battery, you can buy a new one and fix it by replacing it at this step. However, please take care to check if the Samsung Galaxy S5 battery you buy is genuine, for a fake battery may trigger an explosion. (Here is good tutorial: How to Identify the Original and Fake Cellphone Battery)

Step 4: Remove the cover protecting the connector underneath it.

Note: Do not use sharp tweezers which will damage the plastic cover.

Step 5: Disconnect the Galaxy S5 home button connector.

Step 6: Use a hair dryer to heat up the Galaxy S5 screen.

The Galaxy S5 LCD screen and digitizer touch screen assembly is firmly glued to the rear housing by sticky adhesive, so you have to heat up the screen of Galaxy S5 with a hair dryer or heat gun. Make the screen hot enough until the glue is loose.

Step 7: Use the plastic spudger to pry the Galaxy S5 screen and wedge several case opening tools around the side.

Note: Do not pry the Galaxy S5 screen from the bottom of the phone, because the GS5 home button, back button and menu button locate at the bottom. Also, you have to be aware there is a flex cable connecting the LCD screen and digitizer and mainboard at the upper side of the screen component, so do not push too deeply when you detach the tape with the spudger tool.

Step 8: Disconnect the flex cable of Galaxy S5 screen assembly connecting the LCD screen and digitizer to the mother board.

Note: When there is a gap between the Galaxy S5 LCD screen assembly and the rear housing, you can use a plastic spudger to disconnect the GS5 screen assembly flex cable.

Step 9: Separate the Galaxy S5 screen assembly from the rear housing. You need to detach the Braket Cu tape carefully from the S5 LCD assembly.

Note: you want to replace any of the Galaxy S5 internals, you have to go through the screen removal process at first. After free the display assembly on Galaxy S5, other part replacements are very easy.

Step 10: The Samsung Galaxy S5 LCD screen and digitizer assembly is separated from the rear housing.

Note: At this step, the Galaxy S5 screen is removed. If your Galaxy S5 screen is shattered or broken, you can replace a new one. But please kindly note the Galaxy S5 home button is attached to the screen. You can buy a new GS5 screen with home button, if not, you have to remove the home button from the broken screen and install it to the new one you buy. Also, if your GS5 home button is broken, you can replace it at this step too.

Step 11: The form tape on the back of GS5 LCD assembly must be changed to the new one whenever reassembled.

Note: When the Galaxy S5 is disassembled, the water resistance performance would be affected. Therefore, you should change the form tape or Galaxy S5 front housing adhesive to a new one to better warranty the feature.

Step 12: You need to remove the residue of form tape on the Galaxy S5 rear housing with cary jig & rework tape.

Note: It is necessary to clean the form tape residue which will affect water resistance performance.

Step 13: Remove the Galaxy S5 Bracket Cu tape.

Note: This Bracket Cu tape is helpful for water resistance performance, and it must be replaced to the new one whenever reassembled to provide a better warranty on water resistance.

Step 14: Unscrew 10 screws holding the middle frame and rear frame on the Galaxy S5 front side.

Note: When you disassemble Galaxy S5, these 10 screws should be replaced to the new one, in order to guarantee the water-resistant function.

Step 15: Unscrew 3 screws at the back of the Galaxy S5.

Note: Whenever reassembled Galaxy S5, these 3 screws should be replaced to the new one for water resistance performance.

 Step 16: Pull the rear frame out of middle frame on Galaxy S5. You can start the job from the top.

Note: You also can separate out the Galaxy S5 middle frame with the help of case opening tool. The Galaxy S5 motherboard is fixed to the middle plate.

 Step 17: The Galaxy S5 rear housing is removed from the middle plate.

Step 18: Peel off the Samsung Galaxy S5 ear phone jack with tweezers.

Step 19: Remove the Galaxy S5 loud speaker with the help of tweezers.

Step 20: Unscrew 2 screws securing the Galaxy S5 mainboard to the frame.

Step 21: Disconnect the antennas on Galaxy S5 connecting the charging port to the mainboard.

Step 22: Separate the Galaxy S5 motherboard from rear housing.

Step 23:  Lift up the Samsung Galaxy S5 rear-facing camera which is attached to the mainboard.

Step 24: Peel off the Samsung Galaxy S5 front-facing camera with spudger.

 Step 25:  Remove the Galaxy S5 charging port with the menu button, back button, and fingerprint scanner.

Note: You may replace the charging port the most often on the phone besides the cracked screen. So at this step, you can replace a new charging port by follow the instructions.

Step 26: Peel off the Galaxy S5 vibrating motor with tweezers.

Step 27: Step-by-step Samsung Galaxy S5 disassembly job is finished.

Samsung Galaxy S5 comes with the new water resistance performance. However, if your Galaxy S5 suffers breakage and need to be repaired, you have to be aware of some non-reusable parts that must be replaced to the new one when reassemble.

These parts are:

Galaxy S5 front housing adhesive / form tap

Galaxy S5 Bracket Cu tape

10 screws on the middle frame

3 screws on the rear housing.

How to Disassemble/Tear Down the HTC One M8

This article is collected in internet to show how to  fix HTC One M8. Anyone wants to fix his or her Broken HTC One M8  can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

Tools needed: Hair Dryer/Heat Gun, Tweezers, Cutter Knife, Metal Spudger Opening Tool, Plastic Case Opening Tools, Small Phillips Screwdriver and T5 Screwdriver.

1. Power off the HTC One M8.

2. Heat up the Top and Bottom Cover with a Hair Dryer or a Heat Gun.

3. Use a Cutter Knife to pry up the Top and Bottom Cover (please pay special attention during this process).

4. Undo 2 Screws with the help of T5 Screwdriver underneath the Top Cover then 4 Screws with Small Philip Screwdriver underneath the Bottom cover.

5. Take out the SIM Card Tray and SD Card Tray with an eject tool or Tweezers.

6. Separate the LCD Assembly and Rear Housing with the Cutter Knife.

7. Pry out the LCD Assembly with the Case Opening Tools and Metal Spundger Opening Tool.

8. The LCD Assembly and Rear Housing are separated.

9. Peel off the tapes with the Tweezers.

10. Take out the Black Signal Cable with the Tweezers or the Case Opening Tool.

11. Pry up the 6 connectors with a Case Opening Tool.

12. Peel off the Charging Port Flex Sticker and pry out the connector with the Tweezers.

13. Use the Tweezers to pry up the Blue Signal Cable.

14. Pry up the two White Signal Cables on both upper and bottom parts.

15. Use the Metal Spudger Opening Tool to pry up the motherboard and then the battery.

16. Take out the Loud Speaker Assembly and Internal Top Cover.

17. Pry up the 3 Connectors that connect LCD Assembly and Motherboard Flex.

18. Pry up the Rear Facing Camera and then the Motherboard Flex.

19. Pry up the Rear Facing Camera and Front Facing Camera Connectors.

20. Take out the Ear Speaker.

21. Take out the Earphone Jack and the disassembly is finished.

How to tear down Huawei Ascend P7

This article is collected in internet to show how to  fix Huawei Ascend P7. Anyone wants to fix his or her Broken Huawei Ascend P7  can buy the parts in that website and here i found a coupon code that can be used to get discount in the website:ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

Tools needed:

    Philips Screwdriver (1.5*25 mm)

    Tweezers

    Suction cup tool

    Spudger Tools

    Heat gun or Electronic Hair Drier

   Case Opening Tool

    Pry up Tool

Here we show you how to disassemble Huawei Ascend P7 step by step.

1.Heat the glass panel edge on the back for several minutes, so the adhesive loosens. (Notice: keep heating for a while for the adhesive on the panel is very strong. Otherwise, it’s very easy to be crushed.)

2.Use a plastic spudger and opening tool to gently pry up the glass, then use the suction cup to remove the back panel.

3.Disconnect the volume button flex cable and LCD screen and digitizer assembly flex cable.

4.Undo 1 screw in the logic board, then Remove the metal retaining bracket.

5.Undo 9 screws in the top of the phone.

6.Remove the antenna.

7.Remove the metal retaining bracket.(Notice: the metal piece can be stuck in the gap )

8.Disconnect the front camera flex cable and remove the front camera.

9.Disconnect the headphone jack flex cable.

10.Pry up the vibrating motor, then remove them all.

 11.Undo 2 screws in the logic board.

12.Remove the SIM-card trays.

13.Use the strong plastic spudgers to pry the battery off its adhesive.(Notice: Keep patient and handle carefully for the LCD screen and digitizer assembly flex cable attached between the battery and housing)

14.Undo 3 screws in the bottom of the phone and remove the black plastic retaining bracket.

15.Remove the logic board. (Notice: the rear facing camera is still connected to the motherboard. Handle carefully!)

16.Disconnect the rear facing camera flex cable.

17.Remove the ear speaker.

18.Remove the loud speaker in the bottom of the phone.

19.The Huawei Ascend P7 teardown is finished.

How to Disassemble Galaxy Note 3 for Screen/Parts Repair

This article is collected in internet to show how to  fix Galaxy Note 3. Anyone wants to fix his or her Broken Galaxy Note 3  can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

When you happen to break your Samsung Galaxy Note 3, we suggest you using warranty or insurance if the smartphone is covered by the insurance, before DIY repairing the phone yourselves. In case you need to repair broken Galaxy Note 3 parts, you can learn from this tutorial to do the job.

Here we walk you through how to disassemble the handset. From the tutorial, you can understand how to tear down the Galaxy Note 3 for damaged parts repair, or handle the following broken parts problems.

• Replace cracked or shattered Galaxy Note 3 screens.

• Repair broken Note 3 front housing and rear housing.

• Fix Galaxy Note 3 damaged back camera module

• Replace Note 3 malfunctioned USB module

• Replace Note 3 broken headphone jack and speaker

• Fix Galaxy Note 3 front camera and sensors

What you’ll need to disassemble/repair broken Galaxy Note 3 parts

•Small Phillips Screwdriver

•Spudger Tool

•Case Opening Tool

Step 1: Power off the Samsung Galaxy Note 3

Step 2: Remove the Note 3 back cover and battery


Step 3: Take out the SIM card

Step 4: Unscrew the 12 screws to remove rear housing

Use Phillips Screwdriver to undo these 12 screws securing the back housing and front housing.

Note: Check if your SM-N9005 or SM-N900 or other Galaxy Note 3 models came with a warranty sticker covering a screw. Remember unscrewing it will void your warranty or insurance.

Step 5: Take out the stylus/S pen

Step 6: Pry up the rear housing and take it out

Use Spudger tool to slide around the housing frame to pry up the back housing. If you don’t have Spudger at hand, you can use a plastic tool or guitar pick instead.

Step 7: Remove the motherboard by disconnecting 6 cables connectors

Release these flex cable ribbons of front-facing camera, proximity sensor, headphone jack and LCD. Pop out the flex cables of home button and charging port at the bottom of the motherboard. Then Pop out the antenna connector.

Step 8: The Galaxy Note III motherboard is separated.

Step 9: Remove the back camera

Easily remove the Note 3 back camera installed on the motherboard.

Note: If your note 3 back camera module is damaged, you can replace it at this step for repair.

Step 10: Remove the antenna connector and USB module

Take off the antenna connector with case opening tool to remove USB module carefully. The USB board is stuck with adhesive. Pull it off carefully.

Note: You can replace the broken USB port at this step.

Step 11: Take out the earphone jack and earphone

Unscrew the screw securing the headphone jack and earphone. Then take it out.

Note: Note 3 users can replace the damaged headphone jack and speaker at this step.

Step 12: Release front camera and sensors

Peel off the metal shield of front housing to lift up the front camera and sensors.

Note: You can fix a broken front camera and sensors at this step.

Step 13: Take out vibrating motor

The Vibrating motor is glued on the front housing and connected with power button, so pry it out gently with the Phillips screwdriver.

Step 14: Release the whole Galaxy Note 3 screen assembly

Note: If the Note III screens are smashed, the best way to repair the screen is to replace the LCD and touch screen digitizer assembly with front housing, for replacing only the Galaxy Note 3 glass screen or the LCD, touch screen needs professional tools and knowledge. You can go through the above-mentioned steps to this part and replace the entire display assembly.

The whole Samsung Galaxy Note III parts.

How to Repair a Cracked Screen on the Nexus 7 (2012 Edition)

This article is collected in internet to show how to  fix Nexus 7 . Anyone wants to fix his or her Broken Nexus 7   can buy the parts in that website and here i found a coupon code that can be used to get discount in the website: ETS8NTT3,which won’t be expire until Dec 31,2014. It only can be used once for one account.

Cracked the screen on your Nexus 7 and don’t know what to do with it? Then this repair guide of repairing a cracked Nexus 7 screen could help you. Follow the steps blow and you’ll have a new screen on your Nexus 7.

Tools:

Small Phillips Screwdriver

Plastic Pry Tool

Case Opening Tool

Replacement Part:

Nexus 7 LCD Screen and Digitizer Assembly with Front Housing

Or Nexus 7 LCD Screen and Digitizer Assembly

Tweezers

Step 1

Turn the Nexus 7 off and use case opening tool to separate the back cover from the front housing.

Step 2

Use tweezers to peel off two tapes securing the battery and use plastic pry tool to pry up the battery.

Step 3

Unplug the battery connector to remove it.

Step 4

Undo three screws to lift up the loud speaker module.

Step 5

Unplug the loud speaker module connector to remove it.

Step 6

Use small Phillips screwdriver to undo four screws securing the charging port flex cable.

Step 7

Use tweezers to peel off the silver tape and undo one screw under there.

Step 8

Lift up the connector bar to remove the charging port flex cable.

Step 9

Lift up the connector bar to remove the side keys’ flex cable.

Step 10

Lift up the connector bar to disconnect the flex cable.

Step 11

Use heat gun to warm the heat sink foil.

Step 12

Use tweezers to peel off the heat sink foil.

Step 13

Separate the heat sink foil from the flex cable until the heat sink foil is removed.

Step 14

Disconnect the flex cable with plastic pry tool.

Step 15

Lift up the two connectors bars securing the flex cable in place and use tweezers to remove the flex cable.

Step 16

Remove the mainboard flex cable.

Step 17

Use tweezers to peel off the warranty label on the screw carefully.

Step 18

Undo all the screws around the outside.

Step 19

Remove the mainboard away.

Step 20

Remove the metal frame.

Step 21

Peel off the black tape and lift up the connector bar to remove the LCD flex cable.

Now only the Nexus 7 screen assembly with frame is left. If the new screen replacement part you get comes with the frame, you can install the new screen and assemble the phone in reverse order above. But if the new screen doesn’t include the frame, you have to separate it from the broken screen as following steps.

Step 22

Separate the frame from the screen by starting from the side carefully, because the frame is glued to the screen by double tape.

Important note: it’s easy to separate the frame in the side part, but the top and bottom are glued tightly. It will be a little more difficult. If you want to avoid trouble, you’d better get a new screen with frame.

Step 23

Put the double tape back on the front frame in order to use it again. But if the double tape is useless after you peel it off, you have to get a new double tape.

Step 24

Use tweezers to peel off the silver tape if the new replacement screen doesn’t include it.

Step 25

If your new screen doesn’t come with the black foam pad, you have to transfer it to the new one.

Now you can reinstall all the teardown parts to the new Nexus 7 replacement in reverse order above.